Whirlpool Dispenser Parts

The part went on easily. U Tube video answered any questions I had before installing. Read more

• Ice maker dispenses too much ice

Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy. When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire... Read more

• Will not dispense detergent

I ordered the part, looked at a YouTube instructional video on how to do it, and did it myself. It wasn't too hard, and I have no experience. I received the part very quickly! Read more

Found the parts on appliance parts pros and ordered them. It was amazing one arrived the next day and the other just the day after that it was so quick! There wasn't any real assembly just pulled the old drawer out and put in the new one! Read more

• Door sweating

The ice dispenser chute door had not been sealing for years. The ice cubes on the lower portion of the ice bin would melt enough eventually to then freeze up into a big, amalgamated blob of ice due to ambient air coming up the chute. This melt-then-freeze would happen, to the extent the chute froze to its own closure. Despite service technician visits over a period of six years nothing they did resolved the issue. I opened the freezer door to reach into the bin from the top to extract usable... Read more

Finding the part was puzzling. AppliancePros had the relevant manufacturer's part schematics handy on-line through which I quickly identified and order the replacement part. But the best aspect was AppliancePros' Amazon-like excellence in a) pricing and b) swift delivery (with precious tracking included). Read more

• Will not dispense detergent

I ordered a new soap dispenser and began a new venture in repairing my dishwasher. I turned off the breaker that suppled power to the unit. I removed all the T-15 torx screws from the inside cover except one, which my wife helped me hold in. This prevents the cover from dropping off. Then, after removing those two, we closed the dishwasher cover, and lifted off the outside cover. That being off, I saw the two wires connecting the dishwasher dispenser solinoid. Removed them. Notice, that one... Read more

First unplug or turn off the electrical breaker to the dishwasher. Then I removed the phillips head screws holding the inner door to the outer door panel. I then removed the hex head screws holding the dispenser assembly. The electrical connection needs to be disconnected and then reverse the procedure to install the new dispenser. Restore power to the dishwasher and your done. Read more

As a homeowner, I love that I can just type my model number into Appliance Parts Pros website and find a listing/diagram of the entire unit. So when my dispenser on my dishwasher broke, I just ordered a new one. I use You Tube to watch videos on the specific repair, and then VOILA! I do the repair myself, saving at least a hundred dollars in a repair persons service call charge! While this repair was for my dishwasher, I've also fixed my washing machine, dryer, and steam humidifier. Read more

• Will not fill with water

After watching the YouTube video provided by Appliancepartspros and checking various forums I determined the dispenser motor had gone out. Turns out, it was a two part problem. The connectors to the motor, and the motor had corroded. Cleaned them both with vinegar. The old motor did a load before I started having problems with the CCU. I didn't learn about the CCU needing a reset under the quick diagnostics until after replacing the motor and the new part doing the same thing. Both the new... Read more

Since door latch parts are not available, I replaced the entire dispenser assembly. While waiting for the part to arrive, I watched the installation video, which made the installation quite easy. Read more

The soap dispenser had a broken water valve, and I had to replace it with the new one you sent me, and it works perfectly. Read more

Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle. Read more

Purchased a fabric softener dispenser from appliance parts pros removed cap from agitator and replace with the new fabric softener dispenser and problem solved. Read more

I purchased part #85753076A, Whirlpool Fabric Softener Dispenser. Popped off the top from the agitator and popped on the fabric softener dispenser. It took me less than a minute and it works perfectly! No more missing the rinse cycle!!! Read more

Replaced sump because the seal is not sold separately. You will need a skinny clamp after cutting the original swaged clamp off. Also Had to replace the cover as its seal is not sold separately either. Used dish soap on seals during assembly. Read more