Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

General Electric Range / Cooktop / Oven Fuse Or Sensor

Best Seller
Ge Oven Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WB23T10015

Fix F2 or F3 error codes with a new oven temperature sensor. Restores accurate heating when your oven shuts off or won't maintain temperature. 10-15 min DIY.

This part fixes the following symptoms
  • Oven is too hot
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You GE Monogram oven temp was too low and it took a long time to cook food.   Kathleen A. • Saratoga , CA • January 11, 2023

In the middle of Christmas baking, I noticed that it was taking a really long time to bake bread. Since I had already done 5 batches and the timing was always the same, I knew when I had to add 20 min, something was wrong. My oven thermometer (I bought at target) no longer worked so it was hard to tell the exact temperature. First, I went and bought a new thermometer to see the actual temp, then I set the oven to 350 degrees and checked to see what the thermometer was showing. It was almost 50... Read more

More
$27.50
Compare At:
$32.73
You Save:
$5.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Oven Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WB21X5301

Fix oven not reaching set temperature or F2/F3 error codes. This temperature sensor monitors internal heat for accurate cooking. Easy DIY repair.

This part fixes the following symptoms
  • Oven is too hot
  • Won't start
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Wasn't commng up to temperture put it at 350 would only get up to 250   Michael U. • Dix Hills , NY • April 21, 2014

Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly. Read more

More
$134.70
Compare At:
$179.02
You Save:
$44.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Gas Range Oven Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WB20K10027

Fix an oven that won't reach temperature or runs too hot/cold. This temperature sensor monitors oven heat accurately. Easy 15-minute DIY repair.

Do-It-Yourself Stories from Customers like You My ge oven had a problem maintaining accurate temp   Robert A. • California City , CA • April 19, 2014

After ordering, and receiving a new Temp Sensor, I simply replaced the sensor, which was an extremely easy job, and completely resolved my problem. Read more

More
$27.95
Compare At:
$33.26
You Save:
$5.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Gas Range Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WB20K10015

Oven not reaching or maintaining temperature? A faulty temperature sensor often causes inaccurate heating. Moderate DIY repair with video guidance.

Do-It-Yourself Stories from Customers like You F2 error code   Guido P. • Cheyenne , WY • August 30, 2014

The actual replacement part number for my oven was WB21X5301, which costs $84.26, but this part actually fits perfectly (same hole sizes and position, same probe length, same resistance), and is less than 1/4 the price. Just removed the old probed and installed the new one. Read more

More
$43.95
Compare At:
$51.86
You Save:
$7.91

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Oven Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WB23X5340

If your oven won't preheat or shows an F3 error code, this temperature sensor monitors oven heat and safety features. Direct plug replacement, 15-minute fix.

This part fixes the following symptoms
  • Oven is too hot
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You F2 error code   Craig P. • Nashville , TN • March 13, 2015

I was able to find the model number on the lower right hand side of the range/oven, a GE True Temp. I Googled it to find parts, and thought I had found the correct sensor, but was very pleased that the ApplianceParts sire suggested I check compatability again before the order. I would have ordered the wrong sensor kit other wise. I DID get the correct one order. It arrived on time. The tricky part was get the old sensor out without having to pull the oven/range combo out form the wall over... Read more

More
$128.49
Compare At:
$151.62
You Save:
$23.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Oven Thermal Fuse
Genuine Ge part
By: Ge
Part Number: WB24T10060

Oven won't heat or shuts off during baking? A faulty thermal fuse cuts power when detecting excessive heat. This safety device protects your range.

Do-It-Yourself Stories from Customers like You GE profile in wall oven gave F 9 code and would shut off after 30 minutes   Matthew M. • Fairfield , CA • July 23, 2018

The F9 error code is supposed to indicate that the door lock mechanism has failed. My oven would give the F9 code and turn off during normal baking at 400 F after about 30-40 minutes. It turns out that GE must have programmed the error codes incorrectly in my model, because the real problem was that my control board cooling fan was no longer functional, and one of the two thermal switches was shutting off the unit when the control board area got too hot. AppliancePartsPros.com is one of the... Read more

More
$12.95
Compare At:
$15.28
You Save:
$2.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Probe Thermistor
Genuine Ge part
By: Ge
Part Number: WB20T10024

The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking.

Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age.

Symptoms of an inadequate probe thermistor include:

  • Inaccurate temperature readings and baking inconsistencies
  • Oven temperature exceeding desired setting risking fire

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I needed anew probe for my convection oven (geprofile)   Ronald S. • Charlotte , NC • September 21, 2014

I looked diligently for this probe for many months and to no avail. So desperate to find it , I Goggled and found this provider for the probe. I was amazed at the timing of the receipt of the item. I received an email within hours that it had been shipped the same day and arrived at my home within less than 48 hours! The price was great and the item was easy to locate on the site.. Thank you for your attention and customer service. I will use these folks again! Read more

More
$55.78
Compare At:
$66.94
You Save:
$11.16

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Oven Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WB21T10018

Fix erratic oven temperatures or F2 error codes with this temperature sensor. Monitors and regulates heat levels for accurate cooking. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Oven temperature was erratic.   Bruce F. • Pasco , WA • March 12, 2014

Replaced the sensor at the back of the oven. Read more

More
$26.77
Compare At:
$31.86
You Save:
$5.09

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Oven Hi-Limit Thermal Safety Switch
Genuine Ge part
By: Ge
Part Number: WB24T10081

Oven won't heat or shuts off after reaching temperature? The hi-limit thermal switch prevents overheating. DIY repair takes 30-60 minutes.

Do-It-Yourself Stories from Customers like You Oven heating element and broiler heating element stopped working   Peter W. • Wheat Ridge , CO • September 15, 2019

Replaced the hi-limit switch and oven control. Read more

More
$38.95
Compare At:
$46.74
You Save:
$7.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Surface Element Limit Switch (Bimetal)
Genuine Ge part
By: Ge
Part Number: WB24T10127

This bimetal limit switch monitors a radiant surface element's temperature and opens the circuit if it overheats, helping your cooktop maintain safe, consistent heating while protecting wiring and controls from damage. What it does:

  • Senses surface element temperature via a bimetal sensor
  • Opens/closes the circuit to limit element temperature and prevent overheating
  • Helps the burner cycle properly for more consistent heat
  • Common symptoms: no heat, low heat/cycles off too soon, overheating, or erratic cycling
What's included:
  • One bimetal limit switch
Install notes:
  • Disconnect power at the breaker before servicing
  • Access the element, note wire positions, and transfer leads to the new switch one at a time
  • Mount firmly to the element/bracket so the sensor has correct contact
  • Do not bend or adjust the sensor; replace if damaged

Do-It-Yourself Stories from Customers like You Oven was shutting off when it reached temps over 400 control panel was frozen and very hot the only way to reset was to flip the breaker off and on   Joan L. • Waxhaw , NC • June 02, 2019

We initially called a repair company who immediately diagnosed the fan, without opening up anything. They quoted $550 to repair. $159 of that was the fan part. Plus they told me the parts come from overseas and will take 2 week to arrive. I researched the model number and can part and found exactly what I was looking for on your site. Plus there were diagrams and forum discussions that boosted my confidence on repairing ourself. Using your parts diagrams and our manual information, we pulled... Read more

More
$18.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Oven High Limit Safety Switch
Genuine Ge part
By: Ge
Part Number: WB24X46906

Fixes oven not heating after self-clean cycle. This thermal safety switch cuts power when temperatures get too high. Simple diagnosis with continuity test.

Do-It-Yourself Stories from Customers like You Oven not heating   Paul M. • Port Charlotte , FL • November 25, 2025

Replace TCO Read more

More
$98.95
Compare At:
$116.76
You Save:
$17.81

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Fuse (250V 15A)
Genuine Ge part
By: Ge
Part Number: WB27X10454

This 250V 15A safety fuse protects the appliance's line circuit from overcurrent. When the original fuse has blown, replacing it can restore power and help safeguard internal components from further damage.

  • Opens the circuit if excessive current or a short occurs, protecting internal parts
  • Common symptom: unit completely dead—no display, lights, or response to controls
  • Blown fuse will test open (no continuity) with a multimeter
  • If a new fuse blows again, another component may be shorted and needs diagnosis
What's included: 1 fuse rated 250V 15A
  • Unplug the appliance before servicing; microwaves can retain a dangerous charge—discharge the high-voltage capacitor
  • Access the fuse near the line filter/control area; note clip orientation
  • Replace only with the same 250V 15A rating; never bypass or upsize the fuse
  • If the replacement fuse blows immediately, stop and troubleshoot the root cause

Do-It-Yourself Stories from Customers like You It stopped working after i boiled eggs in it the fuse was burn and the letch of the door broke   Kazem A. • Porter Ranch , CA • August 11, 2015

I replaced both the fuse and the latch. it started working smoothly even better the before. Read more

More
$26.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Oven Thermal Limit Switch
Genuine Ge part
By: Ge
Part Number: WB24T10118

Oven overheating or won't heat properly? This thermal limit switch monitors temperature and cuts power to prevent damage. Resets automatically when cooled.

More
$20.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Oven Temperature Sensor
Genuine Ge part
By: Ge
Part Number: WB23T10020

Fix inaccurate oven temperatures or error codes with a new temperature sensor. Restores consistent heat regulation and reliable preheating performance.

Do-It-Yourself Stories from Customers like You Error code 7   Steven C. • Porterville , CA • March 31, 2014

I ordered this new sensor AP3792882. It was said to be the same as the original one. It did not look like the original but it was alot cheaper. It works great. Thanks alot. My girl makes great chocolate chip cookies with this oven. Read more

More
$23.95
Compare At:
$28.50
You Save:
$4.55

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Oven Thermal Limit Switch
Genuine Ge part
By: Ge
Part Number: WB24T10061

Fix oven overheating or F9 error codes with a thermal limit switch replacement. This safety shutoff prevents damage when temperature exceeds safe limits.

Do-It-Yourself Stories from Customers like You F9 error code   Robert P. • Escondido , CA • August 27, 2018

I replaced the cooling fan for the lower oven. This fan is located in the space between the top and bottom ovens. I also chose to replace both the BAKE and TCO thermostats. Read more

More
$22.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Fuse, 15 Amp
Genuine Ge part
By: Ge
Part Number: WB27X7

Ceramic

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You No power   Gerardo G. • Miami , FL • April 11, 2018

I had a blown fuse in which I replaced it and is up and running now. Read more

More
$11.33
Compare At:
$13.48
You Save:
$2.15

IN STOCK
Ships Today Guaranteed
Add to Cart

General Electric range / cooktop / oven fuse or sensor replacement parts play a crucial role in keeping your kitchen appliances in top-notch condition. These parts might be small and often hidden, but their significance in maintaining the safety and functionality of your General Electric range or oven can't be overstated. By ensuring these components are always in good working order, you help your appliance perform efficiently and safely.

Your General Electric cooktop is the heart of many family meals, and its smooth operation depends on the reliability of every part. Fuses and sensors are critical in regulating the temperature and ensuring that cooking is both safe and consistent. General Electric sensors maintain the desired heat levels, preventing overheating and potential hazards, while fuses act as a safety net, cutting off power during unexpected surges.

Opting for OEM (Original Equipment Manufacturer) replacement parts for your General Electric oven guarantees compatibility and quality. These are specifically designed to match the specifications of your appliance, ensuring a seamless fit and optimal performance. By choosing genuine General Electric parts, you're investing in the longevity and reliability of your kitchen appliance.

With readily available General Electric range parts, including fuses and sensors, you can have peace of mind knowing that maintaining your appliance's safety and performance is a straightforward task. It's comforting to know that these high-quality, essential components are just a purchase away whenever you need them.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store