Kenmore Washer 110.84416100 (11084416100, 110 84416100) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10501250
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Shift actuator Jesse M. • Nipomo , CA • October 04, 2025
With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Whirlpool part
By: Whirlpool
Part Number: 285805
Washer won't fill or drips water after cycle? The water inlet valve controls hot and cold water flow. DIY-friendly repair with video guide included.
This part fixes the following symptoms
-
No hot or cold water
-
Will not stop filling with water
-
Will not fill with water
-
Fills and drains at the same time
See more...
Do-It-Yourself Stories from Customers like You
Water would leak into the tub after a wash load was finished also the hot water valve would make a loud buzzing noise before it turned on the water Robert B. • Robins , IA • January 23, 2015
I watched the how-to video on your website to learn how to get at the valve to replace it. Before watching the video, I did not know how to take the washer cabinet apart to replace the valve.
I searched on your website for my washer model, but the exact model number was not listed. I chose a very similar model number and looked up the info for that machine's replacement valve . It looked like it would work in my washing machine so I decided to take a chance and order the valve.
I placed my...
Read more
More
$32.64
- Compare At:
-
$38.52
- You Save:
-
$5.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358237
This agitator Bolt is an OEM replacement part for Whirlpool washing machines. It is a crucial component for maintaining the performance of various washing machines and washer-dryer combos. This agitator bolt secures the agitator, ensuring smooth and efficient operation. The kit includes one 7/16" screw head bolt with a rubber gasket and threaded sealant.
Causes of a faulty bolt can be damage from mineral deposits accumulation preventing smooth tightening, or wear over time compromising the threading.
Symptoms of a bad agitator bolt include:
- Loose or wobbly agitator unable to spin freely
- Abnormal noises or vibrations during cycles
- Insufficient cleaning from improper agitation
- Safety concerns if the agitator detaches entirely
This OEM replacement part is also compatible with Inglis, Estate, Admiral, Crosley, Roper, Magic Chef, Amana, KitchenAid, Maytag, Whirlpool, and Kenmore brand models.
Do-It-Yourself Stories from Customers like You
Whirlpool LSQ8000 clothes mover (upper agitator) not working correctly Tom L. • Minneapolis , MN • March 10, 2018
I had replaced the Agitator cams a couple of times already due to my brother-in-law overloading the machine which stripped the teeth off of the cams. I also noticed the agitator seemed to 'wobble' and made 'knocking' noises quite a bit. I reviewed the video on the Appliance Parts Pros web site, disassembled the agitator and cleaned everything up, which helped a little, but not enough. Figuring the agitator itself was worn out also, I looked up and ordered all the parts for the upper agitator on...
Read more
More
$6.41
- Compare At:
-
$7.63
- You Save:
-
$1.22
Genuine Whirlpool part
By: Whirlpool
Part Number: W10814296
Seals the center post/agitator shaft to prevent water leaks during wash cycles. Replace if you notice pooling water under your washer. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Whirlpool lsr7233eq0 washing machine was leaking out the bottom Jerald F. • Laud Lakes , FL • April 05, 2015
I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the...
Read more
More
$7.48
- Compare At:
-
$8.98
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$22.53
- Compare At:
-
$32.43
- You Save:
-
$9.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356427
Prevents water leaks around the transmission shaft in your washer. Replace if you notice water on the floor or oil seepage. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Whirlpool direct driver washer leak caused by basket drive shaft wear Philip L. • Columbia , MD • November 15, 2019
In reality, this turned into a full-on rebuild project - with several parts orders, not just a simple repair. But I have to give credit: The parts listings with pictures on the AppliancePartsPros web site were really useful in figuring out what was going on inside the machine, and what parts I would need.
Also: The repair videos were critical for me to be able to ensure I was reassembling everything correctly. Shout out to Simon, who was featured in several of the repair videos. His "gorgeous...
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577376
The Shaft Seal is an OEM part for Whirlpool washing machines. This seal is designed to fit around the shaft that connects the tub to the transmission or motor, preventing water from leaking out of the tub and into the machine's internal components.
Causes of damage to the Shaft Seal often involve normal wear and tear from regular use, as the constant motion of the shaft can gradually degrade the seal.
Symptoms of a bad Shaft Seal include:
- Water leaking from the underside of the washing machine, particularly during or after a wash cycle
- A noisy operation, especially during the spin cycle, can sometimes result from water leaking into the bearings and causing them to fail
- The presence of rust or corrosion around the area where the shaft enters the tub
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water on the floor. Steven S. • Eupora , MS • December 24, 2018
Just like the one's I have worked on for 30 years for Whirlpool.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP91939
Prevents water from leaking into the transmission on direct-drive washers. Replace if you see water pooling under the machine or oil rings inside the cabinet.
Do-It-Yourself Stories from Customers like You
Leak (found to be tub seal) and extreme spin vibration. Paul H. • Lakewood , CA • June 26, 2021
First, DO NOT call Sears for parts, their call center knows nothing about the product. App-Pros are the best for help and the right parts. I figured to repair, replace all seals and any item that shows need to and all items that have to do with the spin that may be bad. Repair videos great help. I will start from the "bottom" up, the repairs were not done in this order, just a list of what I did and notes. Replaced-- motor drive coupling, (checked out transmission ok), thrust washer,...
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572717
Washer just hums but won't start? The motor capacitor enables your washer to start and run. Easy 10-minute fix with our installation video guide.
Do-It-Yourself Stories from Customers like You
When the timer was actuated the machine would only hum Ernest Q. • Geneva , FL • December 11, 2015
Not knowing for sure that the problem was the capacitor, I was reluctant to purchase and replace the part. I went AppliancePartPros.com web site and clicked on the part replacement video.The repair video was short and well illustrated. Before the repair began, the service rep says, " the reason you would replace the capacitor is that after turning the timer on, the machine would just hum." The instruction video was the reason that I purchased the part at AppliancePartPros.com The part was...
Read more
More
$59.95
- Compare At:
-
$70.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130
The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.
Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.
Symptoms of a bad Front Leveling Foot include:
- The washing machine rocking or wobbling during operation
- Increased vibration and noise
- The washer being unlevel, affecting wash performance
- Difficulty in adjusting the foot
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle Carl W. • Glendale , AZ • June 27, 2015
REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS...
Read more
More
$6.41
- Compare At:
-
$7.63
- You Save:
-
$1.22
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.48
- Compare At:
-
$8.98
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997
Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.
Do-It-Yourself Stories from Customers like You
Agitator would not work David W. • Murfreesboro , TN • November 19, 2014
Used the parts and youtube video from your company.
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684
Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.
This part fixes the following symptoms
-
Will not agitate
-
Will not drain
-
Won't start
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The spin cycle would not initiate pump to drain tub Douglas B. • Skull Valley , AZ • January 21, 2017
Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new.
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93