Poulan Lawn Mower Parts

Mandrel pulley for riding mower and tractor mower decks. Replaces worn, cracked, or damaged pulleys on the spindle assembly. Essential deck component.

Control cable connects handles to engine and blade system on walk behind mowers. Replace if cable is sticking, frayed, or broken for proper speed control.

Mandrel spacer washer for riding mowers and lawn tractors. Installs between drive pulleys to maintain proper alignment and spacing. Replace if worn or missing.

Secures the mower blade to the spindle on riding mowers and tractors. Replace if bolt is stripped, washer is damaged, or hardware is missing.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

Secures the mower blade to the motor shaft. Replace if adapter is worn, stripped, cracked, or no longer holds the blade firmly in place during use.

Connects mower blade to spindle for secure attachment. Replace if stripped, cracked, or worn to ensure blade stays properly mounted during operation.

Control cable connects engine to safety control bar on walk-behind mowers. Replace if cable is frayed, broken, or detached. Installs between handle and engine.

This is a riding mower fan that works as a replacement for damaged fans for many mower and tractor models. This fan connects to the transaxle above the pulley. The purpose of the fan is simple—it helps to move air around the transmission, which will prevent overheating. If the machine's engine is running hot, a problematic fan could be to blame. Check the fan and replace it if needed. If the fan doesn't run, the tractor will overheat and not operate properly. Overheating could cause further damage to the engine.The fan is made from high-quality plastic. It should last a long time without worry, but blades could crack and break off eventually due to wear and tear. The fan could also be damaged because of an accident. Regardless, replace the fan.The riding mower fan serves as a replacement for tractors and riding mowers from Jonsered, Husqvarna, and Craftsman. It is sold individually and is a genuine OEM replacement part.

Steering shaft connects the steering wheel to the gearbox on riding mowers and lawn tractors. Replace if bent, cracked, or worn for proper steering control.

Plastic choke lever for gas line trimmers and edgers. Actuates the choke valve to limit airflow during cold starts. Replace if cracked, broken, or damaged.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

Won't start or stops running? This riding mower ignition switch controls power to the engine. Common fix for no-start issues. Easy DIY replacement.

Mower won't stop or squeals when braking? This brake pad creates friction against the rotor to safely stop your riding mower. Direct replacement part.

Replacement drive control cable for walk behind lawn mowers. Installs to connect drive mechanism. Replace if snapped, worn, frayed, or damaged.