Snow Removal Equipment Blade

Scraper blade installs at the base of your snow blower housing to clear snow down to pavement. Replace if worn, cracked, or missing bolts are exposed.

Replacement shave plate that attaches to the bottom of the auger housing to protect the auger and housing from debris damage. Replace if cracked or worn.

The shave plate is a common snowblower part that attaches to the back of the blower housing and directs snow into the auger and blade assembly so it can be cleared. The particular layer of ice and snow this blade is removing is the hardest and heaviest part of the snowfall. The shave plate is also called the scraper bar or scraper blade. Periodically, because it is in direct contact with the concrete surface below the snow, the shave plate wears out and must be replaced. A shave plate may be worn, gouged, or sliced so it does not smoothly remove the snow from the sidewalk. Replacing the shave plate is a simple task that can be accomplished in 30 minutes or less. The shave plate is connected to the blower housing by four adjustable fasteners that are removed. This genuine OEM replacement part is manufactured by Genuine MTD. It is compatible with a great variety of snowblowers, including Husky, Troy-Bilt, Yard Machines, MTD, Cub Cadet, and Yard-Man. This OEM part is sold individually.

30-inch shave plate blade for snow throwers. Installs at the auger housing base to protect surfaces. Replace when worn, cracked, or damaged.

This part is a sheave plate that is used on snowblowers. This part is attached to the auger housing base assembly and its purpose is to scrape snow up into the auger blades. A new sheave plate may be needed if there are any signs of wear or damage of any kind. If the snowblower is leaving behind strips of snow, this can be a sign that the sheave plate needs to be replaced; it's also one of the most common signs of a bad sheave plate. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This sheave plate is used on snowblowers manufactured by MTD and Craftsman.

The scraper blade installs at the base of your snow thrower to contact the ground surface. Replace when cracked, worn down, or damaged from use.

This genuine MTD shave plate, also known as a scraper bar, can be used as a replacement part for snowblowers. The shave plate is located at the bottom of the auger to scrape snow off of surfaces and filter it into the auger of the snowblower.Damage to the shave plate might include cracks, dents, and erosion to the metal material, or it can gradually wear out and no longer be effective. Evidence of a cracked shave plate can come from a visual inspection, but it can also be detected if the snowblower is doing a poor job of collecting and scraping snow off of surfaces. A cracked shave plate should be removed and replaced immediately, and a snowblower should not be used before the part is replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shave plate is compatible with the following brands: MTD, Yard Machines, Cub Cadet, Yard Man, and Craftsman. Part sold individually.

Scraper bar installs at the base of your snowblower auger housing to scrape packed snow from walkways and driveways. Replace if cracked or worn down.