Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

General Electric Bumper, Bushing, Grommet Parts

Best Seller
Ge Refrigerator Evaporator Fan Motor Grommet
Genuine Ge part
By: Ge
Part Number: WR02X12008

Rubber grommet that seals and cushions where the evaporator fan motor shaft mounts. Replace if cracked, worn, or missing to eliminate noise and vibration.

Do-It-Yourself Stories from Customers like You Evaporator fan motor whining keeping me up at night then it sounded like rocks were in it   Judy P. • Lakeside , CA • March 30, 2015

It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in... Read more

More
$9.95
Compare At:
$11.84
You Save:
$1.89

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Refrigerator Evaporator Fan Motor Grommet
Genuine Ge part
By: Ge
Part Number: WR02X10098

Rubber grommet cushions and stabilizes the evaporator fan motor in your refrigerator. Replace if cracked, worn, or missing to reduce vibrations and noise.

This part fixes the following symptoms
  • Freezer section too warm
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Fan was making noises.   Mark M. • Easton , PA • May 15, 2023

My refrigerator's cooling fan was making a noise. It wasn't loud; in fact, it was barely discernible. However, it was just loud enough to annoy me. The fan blade was hitting the shroud every now and then, creating a subtle, yet annoying sound. I'd tried tightening all the screws back there, and it helped-for a while. The noise came back. After looking at the fan motor, I noticed the bushings; it occurred to me that they might be the culprit. And why not? They were the originals installed at the... Read more

More
$9.56
Compare At:
$11.38
You Save:
$1.82

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Refrigerator Drawer Slide Bearing
Genuine Ge part
By: Ge
Part Number: WR1X2048

Slide bearing for refrigerator drawer rails. Enables smooth in-and-out drawer movement. Replace if cracked, worn, or causing drawers to stick or jam.

Do-It-Yourself Stories from Customers like You Broken drawer slides for refrigerator drawers   William L. • Bainbridge Is. , WA • February 24, 2015

Although the web ordering process was clear, I needed some "personal contact" via customer service. It took very little time to assure me the the parts were the correct ones and the video was easy to follow. When the parts arrived in 2 business days, it took only 30 mins. to complete the replacement of the slides. The video was a great way to assure there was no wasted time or effort. Read more

More
$12.45
Compare At:
$14.94
You Save:
$2.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Refrigerator Fan Motor Grommet
Genuine Ge part
By: Ge
Part Number: WR02X11331

Rubber grommet that mounts and cushions the evaporator or condenser fan motor. Replace if cracked, worn, or missing to prevent vibration and noise.

Do-It-Yourself Stories from Customers like You Noisy fan   Robert M. W. • Palmetto , FL • October 29, 2016

I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more

More
$10.95
Compare At:
$12.92
You Save:
$1.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Lid Bumper
Genuine Ge part
By: Ge
Part Number: WR02X10540

The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing. 

Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.

Symptoms of a bad Lid Bumper include:

  • The refrigerator lid closing too hard
  • Unusual noises when closing the lid
  • Visible wear or cracks on the bumper

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Evaporator fan motor   Charles D. • Covington , LA • November 01, 2015

Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more

More
$9.56
Compare At:
$11.28
You Save:
$1.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Refrigerator Ice Dispenser Solenoid Valve Kit
Genuine Ge part
By: Ge
Part Number: WR62X23154

Ice dispenser only making crushed ice instead of cubes? This solenoid valve kit fixes the cube/crushed ice selector. Easy DIY repair with video guide.

Do-It-Yourself Stories from Customers like You Ice (broken seal) fizzer light out due to ice then auger motor auger coupler and solenoid cube failure   Damon B. • Tumwater , WA • December 19, 2015

This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more

More
$97.51
Compare At:
$115.06
You Save:
$17.55

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Bumper
Genuine Ge part
By: Ge
Part Number: WB2K15

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

  • Excessive noise
  • Difficulty in sliding the drawer
  • Misalignment
  • Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Bumbers on stove top grates failed due to time of use   Howard V. • Baton Rouge , LA • February 14, 2016

Looked for the parts at this site and ordered those need plus spares Read more

More
$10.56
Compare At:
$12.57
You Save:
$2.01

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Refrigerator Ice Maker Fill Tube Grommet
Genuine Ge part
By: Ge
Part Number: WR2X8474

Rubber grommet seals the ice maker fill tube where it enters the refrigerator cabinet. Replace if cracked, brittle, leaking, or missing to restore seal.

This part fixes the following symptoms
  • Leaking
  • Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor   Terry C. • Durham , NC • February 16, 2019

Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more

More
$32.95
Compare At:
$38.88
You Save:
$5.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ge Refrigerator Fan Motor Mounting Grommet
Genuine Ge part
By: Ge
Part Number: WR02X10520

Rubber grommet that mounts the evaporator or condenser fan motor to its bracket. Replace when worn, cracked, or missing to reduce vibration and noise.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Condenser fan stopped.   Bob W. • San Carlos , CA • May 01, 2021

Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more

More
$9.71
Compare At:
$11.55
You Save:
$1.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Refrigerator Door Spacer
Genuine Ge part
By: Ge
Part Number: WR1X1794

Positions refrigerator door components with correct clearance for smooth swinging and level alignment. Replace if worn, cracked, or missing to restore fit.

Do-It-Yourself Stories from Customers like You Missing handle and door out of alignment   Mike S. • Clinton , IA • April 16, 2015

New Door Handle and the plastic spacers Read more

More
$11.95
Compare At:
$14.34
You Save:
$2.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Rivet Assembly (Single)
Genuine Ge part
By: Ge
Part Number: WB01X45506

This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:

  • Secures panels, brackets, or component mounts to restore proper alignment and support
  • Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
  • Provides a durable mechanical fastener where original rivets have sheared or loosened
  • Helps maintain safe operation by keeping parts properly retained
What's included: One rivet assembly Install notes:
  • Disconnect power (and gas/water if applicable) before attempting any repairs
  • Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
  • Keep hardware orientation the same as the original; replace any damaged surrounding parts

Do-It-Yourself Stories from Customers like You Ge microwave: sparking melted hole in stirrer fan cover and it would not run without sparking   Henry H. • Swanton , OH • September 10, 2016

I replaced the stirrer fan cover and fan, which had some carbon and slight burn marks on it. It was difficult to remove the fan cover as it did not rotate. I had to pry it off with a flat blade screwdriver, breaking the plastic tabs on the cover (which was being discarded anyway). I then cleaned any visible carbon deposits and replaced the cover and fan, using the old stirrer fan holder as it appeared OK. However, I was unable to rotate the cover into the locked position so I could not insert... Read more

More
$7.52
Compare At:
$8.36
You Save:
$0.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Oven Reinforcement Spacer
Genuine Ge part
By: Ge
Part Number: WB02T10452

Reinforcement spacer maintains proper gap and support between panels, trim, or brackets. Replace if worn, missing, or cracked to restore alignment.

Do-It-Yourself Stories from Customers like You Screw head broke of handle   Ward B. • Conway , AR • August 27, 2025

Ordered the 3 parts that hold the handle to the glass. Replacements fit perfectly and the repair only took 10 minutes to complete. Read more

More
$20.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Refrigerator Ice Maker Mounting Grommet
Genuine Ge part
By: Ge
Part Number: WR02X10678

Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.

Do-It-Yourself Stories from Customers like You Water in door came out in reduced stream   James K. • Estero , FL • December 10, 2015

Replaced the housing the water filter screws into. Water works fine now. Read more

More
$7.95
Compare At:
$9.46
You Save:
$1.51

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Dishwasher Door Hinge Cup
Genuine Ge part
By: Ge
Part Number: WD01X10218

Door hinge cup mounts at the lower front corner of the dishwasher tub to cradle the hinge arm. Replace if cracked, worn, or broken to restore alignment.

More
$14.58

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Range Spacer
Genuine Ge part
By: Ge
Part Number: WB02K10156

Maintains proper gap between range components for secure mounting. Replace if worn, missing, or cracked to prevent panel rubbing and ensure correct alignment.

More
$8.95
Compare At:
$10.56
You Save:
$1.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Ge Washer Lid Hinge Bushing
Genuine Ge part
By: Ge
Part Number: WH01X10025

Double-style bushing supports the washer lid hinge pin. Replace worn or cracked bushings to restore smooth, quiet lid operation and proper alignment.

This part fixes the following symptoms
  • Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You No problem just needed freshening up. No sense in buying new when the old is better.   James C. • New Smyrna Beach , FL • July 16, 2019

Not hard when you have videos and a mechanical background....piece of cake.... Read more

More
$16.55
Compare At:
$19.69
You Save:
$3.14

IN STOCK
Ships Today Guaranteed
Add to Cart

General Electric bumper, bushing, grommet replacement parts are essential for keeping your appliances running smoothly. These small components might seem insignificant, but they play a pivotal role in the overall functionality of your appliance. Whether it's a washer, dryer, refrigerator, or lawn mower, having high-quality bumpers, bushings, and grommets ensures that everything stays in top shape and performs optimally.

General Electric parts, such as bumpers, bushings, and grommets, absorb vibrations, reduce noise, and protect other components from wear and tear. They help maintain the alignment and stability of moving parts, which is crucial for the efficient operation of your appliance. OEM replacement parts, like those from General Electric, offer superior quality and compatibility, providing a perfect fit and long-lasting performance.

When it comes to maintaining or restoring the functionality of your appliance, having reliable General Electric bumper, bushing, and grommet parts can make all the difference. Rest assured, these parts are readily available and designed to meet the highest standards of quality, keeping your equipment running like new for years to come.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store