Need Help?
Call or text
The Oven Overlay is an OEM replacement part for GE ovens. This overlay is essentially the interface between you and your oven's control board. It features buttons and symbols that allow you to set temperatures, cooking modes, and timers. The overlay is designed to fit directly over the control board, providing a user-friendly interface for your appliance. Causes for a malfunctioning Oven Overlay can include wear and tear from frequent use, damage from cleaning solutions or spills, or issues with the adhesive that keeps it attached to the control board. Symptoms of a bad Oven Overlay include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
My wife put the faceplate on the oven control while I accessed the display by pulling the oven out, unplugged it, and removed the rear cover. Only three nut head screws held the upper back panel. 4 nut screws hold the display onto the oven, they were easily removed. My wife took a couple photos of the rear wiring to ensure we plugged the new oven control in properly (there are a fair number of wires but they are color coded in most cases). Turns out we didn't need the photo. As we pulled a... Read more
White faceplate graphics overlay that covers and protects your range control panel. Replacement needed when scratched, cracked, discolored, or peeling from heat.
Ordered a new Faceplate Graphics, removed old faceplate and installed new. Required removing control panel with switches and display, including 10 screws to get to the faceplate. Faceplate has glue on rim, so had to peel off old faceplate, remove residue, then put on new. Not difficult, but reaching to remove the screws was a little challenging in a small kitchen. Now unit looks brand new! Read more
Protective label overlay for range control panels. Replaces torn, ripped, or peeling overlays. Adhesive film installs over electronic control board buttons.
This fix went great, no problems, about 15 min of work. Just a heads up: the distribution of the wires on the back of the replacement unit was pretty different from the original part (and the part photo on this website). But the wire tabs were labelled on it, so it only took a few minutes to get the wires lined up right. Works like new now! Read more
Adhesive overlay label for range touch control panels. Restores faded, worn, or melted button markings and icons for clear operation and settings selection.
Ordered the parts from Appliance Parts Pros, received within 5 days and replaced parts in less than 30 minutes. No problem with getting correct parts and fast. Read more
Mounts behind the control panel to support and align your range touchpad. Replace if cracked, broken, or causing buttons to misalign for a solid fit.
A very common problem with the GE oven is the dreaded F7 error code. I purchased the control board as well as the keypad and replaced both. The error code could have been either part but since I saw a lot of grease, I chose to change out both even though I isolated the problem to the keypad only. By resetting the error first by hitting the clock button on the keypad, turning off the power,disconnecting the keypad, then turning back on the power if the code doesn't come back it's the keypad. ... Read more
Adhesive-backed overlay that restores worn or faded control panel graphics on your range. Replaces damaged, cracked, or peeling faceplates for clean labels.
Got a replacement real fast delivery from you and exchange it fast and easy Read more
Replace your cracked, worn, or punctured range touch pad overlay. This protective cover installs over the control panel, restoring button function and appearance.
Ordered a new Oven Control unit and an Overlay (ours was punctured in a few places -- old and brittle). Opened the stovetop and removed some screws from the front control panel area. Followed the advice from Appliance Parts Pros' video to take a photo of the locations of all the connections on the old panel before removal -- that was an instrumental step to the success of this project! The whole job took just over an hour. Now the over controls and timers work like new -- because they are!... Read more
This black clock plate is the trim and mounting plate for the range or wall oven clock/timer in the control panel/backguard. It restores a clean, finished look and helps position and support the clock assembly securely.
Control ovn kit Read more
Black overlay that adheres to your range control panel. Replace if cracked, damaged, or worn. Peel-and-stick installation over the control board.
The entire control board was replaced. It was quick and easy! The entire repair took a total of 10 minutes, including testing. Be sure to order the new overlay, its permanently stuck to the face of the board. Read more
Overlay faceplate with printed graphics that adheres to your range control board. Replaces damaged, cracked, or peeling faceplates with faded graphics.
I unplugged the oven and then removed the back panel. Next I started started removing cables from the old control board one by one, being careful to plug them into the same place on the new board. There were some slight differences in where some cables were located, but the ports are labeled and you can just match it that way. Then I applied the new faceplate to the new control board. I unscrewed the old board and screwed in the new board. Very easy replacement. Read more
Glass touch control assembly for range ovens. Replaces worn, cracked, or unresponsive stainless steel touch panel. Restores cooking mode selection.
Replaced the whole Glass Touch Asm. Had to add spacer to bottom or else something was touching the circuit board and the touch screen would not work. Read more
Adhesive overlay that labels the control panel buttons on your range. Replace when worn, faded, peeling, or text becomes illegible over time.
Outer trim for your range control area. Replaces scratched, cracked, or worn faceplates. Covers and protects control buttons and display panel.
Ordered new part, timely arrival, installed in one hour. Thanks for good service. Read more
Replaces the front control panel on your range when cracked, loose, or control markings are worn or unreadable. Restores a secure, clearly labeled surface.
We updated a 'not so old' Biscuit GE Range to BLACK. It was easy to figure out what parts I needed by using the selection process on the web-site, I ordered parts then followed the pictures and videos provided to change out the handle, panel, drawer and knobs, I used two metal look back splash panels on the door to give it a rustic look and am very happy with the result. The range looks great in my newly remodeled kitchen Read more
White touch pad overlay for range control panels. Replaces melted, peeling, or damaged overlays with missing button labels. Installs over control board.
Replaced the sticker that has the buttons displayed. Read more
Replaces cracked, unresponsive, or damaged glass touch pad control panel on your range. Restores clean surface and reliable touch input interface.
The replacement part was: CONTROL OVEN ERC3HP Part Number:WB27K10378 It looks like this superseded the original part, so maybe the mfg knew about this issue? I could not find disassembly instructions so just went straight into it. Here's the steps from memory: 1) Shut off breaker for stove and confirm that panel lights go off 2) Pull range away from wall about 12" 3) Shut off gas feed to stove 4) From the back of the range, remove the two hex washer head screw holding the in place 5)... Read more