Washer Dryer Combo Support Parts
Genuine Lg part
By: Lg
Part Number: 4434ER0002H
Central hub that connects the inner tub to the drive shaft in washers. Replace if corroded, cracked, or arms have broken off causing wobble or imbalance.
Do-It-Yourself Stories from Customers like You
Burnt rubber smell at end of cycle from 11 yr old lg wm2277hw front load washer i hand spun inner drum it was rotating in an oblong manner so thought shaft was bent Kirk E. • Eagan , MN • October 22, 2015
Looked online at several websites to see if I could figure out the problem Came across AppliancePartsPros video on replacing bearings. Watched it a couple of times and determined (well, guessed) it was the bearings and/or spider. Followed the video (great job by the way) and disassembled the washer. The spider was cracked on one arm so ordered a new one from this site. I also ordered two new bearings and the bearing seal b/c learned from the web and local appliance store that they go bad in 7+...
Read more
More
$202.51
- Compare At:
-
$240.99
- You Save:
-
$38.48
Genuine Ge part
By: Ge
Part Number: WE03X27679
The Front Drum Support is an OEM part for GE dryers. It supports the front of the dryer drum, allowing it to rotate smoothly during the drying cycle. This support helps maintain the drum's position and alignment, ensuring efficient and quiet operation.
You should replace the front drum support if it becomes worn out or damaged. Causes of a bad drum support can include regular wear and tear from continuous use, overloading the dryer, or debris causing friction and damage.
Symptoms of a bad front drum support include:
- Unusual noises such as squeaking or grinding during operation
- The drum not rotating smoothly or becoming misaligned
- Clothes taking longer to dry or uneven drying
- Visible wear or damage to the support structure
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Screeching ge profile dryer Larry S. • Savoy , IL • January 16, 2015
Initially I replaced the rear drum bearing assembly. I searched all over for a good how-to video and came across the Appliance Pros tutorial on YouTube. It was by far the easiest to understand with the added bonus that AP had the parts I needed.
I had never done this before, but using the video as my guide I was able to replace the rear bearing assembly in about an hour and a half. It would've taken a little less time if I hadn't had to run to the hardware store for a T25 bit. I also could...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Ge part
By: Ge
Part Number: WH16X10147
Mounts in the washer's drive mechanism to support the shift fork. Replace if the assembly is cracked, broken, or worn to restore proper gear shifting.
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 137107000
Secures the washer's inner basket to the drive hub, keeping the tub centered and stable during spin. Replace if cracked, corroded, or bolts are damaged.
Do-It-Yourself Stories from Customers like You
Leaking washer tub Hugh S. • Miami , FL • June 25, 2016
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off...
Read more
More
$20.33
- Compare At:
-
$24.19
- You Save:
-
$3.86
Genuine Ge part
By: Ge
Part Number: WH16X10146
This transmission and support assembly drives and stabilizes the wash basket. It converts motor power into agitation and spin while supporting the tub, helping resolve no-agitate/no-spin complaints and loud operation for reliable cleaning performance.
- Transfers motor power to the drive system for agitation and spin
- Supports the basket and helps maintain alignment during operation
- Helps correct no agitate, no spin, or weak/intermittent spin
- Can address grinding/rumbling noises or oil traces from the center
Includes: 1 transmission and support assembly
- Disconnect power and water before servicing; wear gloves and eye protection
- Appliance and assembly are heavy—use assistance and protect flooring
- Removal typically requires accessing from top and bottom to remove agitator/basket and drive hardware
- After installation, run a test cycle to ensure smooth agitation, proper spin, and no leaks
Do-It-Yourself Stories from Customers like You
Loud whirring noise on spin cycle Kenneth S. • Lindenhurst , IL • March 08, 2017
Replaced transmission and support assembly. Hub nut corrode on support, spanner wrench would not loosen. Had to use 1 11/16 deep socket and impact wrench to remove, basket would not com off support even after cleaning out and soaking with penetrant and using automotive air hammer to push out. I had to cut support plate in half with die grinder, cut bearing from shaft and punch out agitator shaft then use die grinder with carbide burr to cut basket shaft in two before basket would come off...
Read more
More
$300.95
- Compare At:
-
$361.14
- You Save:
-
$60.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W10863713
Mounting bracket that secures and stabilizes internal washer components. Replace if broken, cracked, or damaged to restore proper panel alignment.
Do-It-Yourself Stories from Customers like You
The support bracket broke Gregory Y. • Homer , AK • March 26, 2017
REPLACED IT WITH NEW ONE
Read more
More
$251.41
- Compare At:
-
$301.69
- You Save:
-
$50.28
Genuine Ge part
By: Ge
Part Number: WH16X10145
Support assembly stabilizes the washer drum and inner tub components. Replace if cracked, worn, or causing misalignment during operation.
More
$281.74
- Compare At:
-
$338.09
- You Save:
-
$56.35
Genuine Ge part
By: Ge
Part Number: WE19M1696
Mounting bracket that secures the control assembly in your laundry center. Replace if cracked, broken, or worn to restore proper panel alignment.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134264800
$37.51
- Compare At:
-
$40.35
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 131793500
Support plate for washer components. Mounts internally to secure parts in place. Replace if cracked, bent, or missing to restore proper structural support.
More
$9.43
- Compare At:
-
$11.22
- You Save:
-
$1.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10514
Support plate that secures the sensor board in your laundry center. Replace if cracked, broken, or missing to properly mount the control board assembly.
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3016442
Door strike plate for washer dryer combo units. Secures the door latch mechanism to the cabinet frame. Replace if cracked, bent, or missing.
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE13X211
Motor cradle support for washer dryer combo units. Securely mounts and stabilizes the motor assembly. Replace if cracked, broken, or worn to restore structural integrity.
More
$110.95
- Compare At:
-
$146.40
- You Save:
-
$35.45
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 08002472
$52.95
- Compare At:
-
$63.21
- You Save:
-
$10.26
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 306054
$18.95
- Compare At:
-
$21.40
- You Save:
-
$2.45
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3387208
Out Of Stock
Usually ships within 4 - 14 days
Washer dryer combo support replacement parts are essential for ensuring your appliance runs smoothly and efficiently. These parts play a crucial role in maintaining the overall performance of your washer dryer combo, allowing you to handle laundry without a hitch.
The washer dryer combo is a convenient and space-saving solution that combines washing and drying in a single unit. By having the right washer dryer combo parts on hand, you can address any wear and tear or maintain your appliance's optimal functionality. Think of your washer dryer combo like a well-oiled machine – each part, from the motor to the drum, works together to deliver clean, dry clothes. Using OEM replacement parts ensures you're getting high-quality components that are designed specifically for your appliance, offering perfect compatibility and reliable performance.
So, when it comes to keeping your washer dryer combo in top shape, rest assured that quality and available replacement parts can make all the difference. Whether it's a belt, pump, or any other component, these parts help keep your appliance running smoothly for years to come.
More