Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Washer Dryer Combo Valve

Best Seller
Washer Water Inlet Valve
Genuine Lg part
By: Lg
Part Number: 5220FR2006H

Fix washer IE error or no water flow issues with this water inlet valve. Controls hot or cold water flow into wash drum. 15-minute DIY repair.

This part fixes the following symptoms
  • Will not stop filling with water
  • Leaking
  • Shuts off too soon
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg   Bruce S. • Van Nuys , CA • December 13, 2015

Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward; requires : 1 phillips screwdriver ~#2 1 needlenose plier, medium size 1 channel lock plier, medium size 1 marker pen 1 - cold water valve assembly # AP4445613 1 - hot water valve assembly #AP4441935 1 - water level pressure switch #AP4440713 an old towel or two for absorbing small amounts of water a cellphone / camera for making sure you have the... Read more

More
$34.95
Compare At:
$41.59
You Save:
$6.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: 285805

Washer won't fill or drips water after cycle? The water inlet valve controls hot and cold water flow. DIY-friendly repair with video guide included.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
  • Will not fill with water
  • Fills and drains at the same time
See more...
Do-It-Yourself Stories from Customers like You Water would leak into the tub after a wash load was finished also the hot water valve would make a loud buzzing noise before it turned on the water   Robert B. • Robins , IA • January 23, 2015

I watched the how-to video on your website to learn how to get at the valve to replace it. Before watching the video, I did not know how to take the washer cabinet apart to replace the valve. I searched on your website for my washer model, but the exact model number was not listed. I chose a very similar model number and looked up the info for that machine's replacement valve . It looked like it would work in my washing machine so I decided to take a chance and order the valve. I placed my... Read more

More
$31.95
Compare At:
$38.02
You Save:
$6.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: 205613

The Water Inlet Valve is an OEM replacement part for Whirlpool washing machines. It is responsible for controlling the flow of water into the washer tub, ensuring the proper water level and supply for each wash cycle.

Causes of a bad water inlet valve can include sediment buildup or obstructions, electrical malfunctions, or normal wear and tear over time, leading to valve failure or improper operation.

Symptoms of a faulty water inlet valve include:

  • The washer not filling with water or filling slowly
  • Incorrect or inconsistent water levels during wash cycles
  • Water leaks around the valve or inlet area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

This part fixes the following symptoms
  • No hot or cold water
  • Will not fill with water
  • Will not stop filling with water
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You 1 water leaking on the floor at left side and 2 occasionally tub filling a number of inches when sitting   Kenneth S. • San Carlos , CA • April 15, 2016

1. Sleeve for input, Injector valve, nozzle and seal for input fixed this problem. Probably the main part that was the trouble was a deformed Injector Valve which is a rubber tube with an internal retention groove at the wide part that grips the Nozzle. The Sleeve and the Nozzle are hard plastic parts that basically looked fine, but I replaced them anyway while I was in there. Additionally I replaced the rubber Seal for Input which seals the plastic input fitting to the tub just to make sure... Read more

More
$77.95
Compare At:
$93.54
You Save:
$15.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Inlet Valve Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 134190200

Washer won't fill with water or only fills with hot? The water inlet valve controls water flow into the tub. DIY repair takes about 30 minutes.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
  • Will not fill with water
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You The washer was filling very slow especially cold water.   Wayne S. • Oakland , MD • February 10, 2023

This is my third repair of this type. The first was a stand-alone washer and was very easy, because there was a plate on which the inlet valve assembly was mounted, and it was easily removed. This repair was on a Frigidaire stacked washer/dryer (laundry center). Stacked washer/dryers are typically purchased to save space and are often tucked into a closet. Be sure you can pull it out to access both front and rear. Remove drain hose from drain, detach water hoses, electricity and dryer vent... Read more

More
$101.69
Compare At:
$121.01
You Save:
$19.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Valve,Water ,115 V
Genuine Frigidaire part
By: Frigidaire
Part Number: 134211400

The Water Valve is an OEM part for Frigidaire laundry centers. It's a part that controls the flow of hot and cold water into the washing machine. By opening and closing at the appropriate times during the wash cycle, this valve ensures that clothes are washed in the correct temperature settings, optimizing cleaning performance and fabric care. 

Causes of a faulty Water Valve include mineral build-up from hard water blocking the openings, wear and tear causing leaks or malfunctions, and electrical problems such as faulty solenoids disrupting operation signals. 

Symptoms of a malfunctioning Water Valve include:

  • Water not entering the washing machine, leading to dry wash cycles.
  • Water entering the machine too slowly, indicating a partial blockage.
  • Water leaking from the valve when the machine is off, suggesting a failure to close completely.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part fixes the following symptoms
  • Will not stop filling with water
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Water was leaking into tub when machine was off   Ronald H. • Tampa , FL • September 22, 2015

Part arrived in one day! Replaced the water valve. YouTube video for replacing water valve on Frigidaire top-loading washers was spot-on. Read more

More
$82.46
Compare At:
$98.95
You Save:
$16.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Water Inlet Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 134890600

Water leaking into the tub or not filling properly? This inlet valve controls water flow into your laundry center. Moderate DIY repair—about 1 hour.

Do-It-Yourself Stories from Customers like You Broken water valve   Laurel B. • Pueblo , CO • April 14, 2014

Removed some screws, opened the top of the wash machine, unplugged some wires to remove the part, plugged the wires back into the mew part, put the new water valve into place, secured the water valve with the screw, put the top back on the wash machine, and replaced all remaining screws! Real Simple! Read more

More
$77.59
Compare At:
$110.21
You Save:
$32.62

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Dryer Combo Water Inlet Valve
Genuine Ge part
By: Ge
Part Number: WH13X10050

Washer won't fill or fills slowly? This water inlet valve controls water flow into your combo unit. Fixes slow fills, no water, and leak issues.

More
$99.95
Compare At:
$118.94
You Save:
$18.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Dispenser Valve Assembly (Water)
Genuine Frigidaire part
By: Frigidaire
Part Number: 131974700

This dispenser valve assembly controls water flow to the fridge door dispenser for reliable dispensing and shutoff. It replaces a failed valve to restore proper water delivery and stop unwanted dripping or leaks. What it does

  • Opens and closes the water passage when the dispenser actuator is pressed to deliver water to the glass.
  • Seals the water line to prevent drips or continuous flow when the dispenser is idle.
  • Helps stop intermittent dispensing or no-water issues caused by a faulty valve.
  • Works with the door dispenser plumbing—electrical/connectors remain unchanged.
What's included One dispenser valve assembly. Install notes
  • Disconnect power and shut off the refrigerator water supply before starting.
  • Remove the refrigerator door panel or access cover per your model's service instructions to reach the valve.
  • Verify electrical connector seating and water line fittings are secure; replace any damaged tubing or seals.
  • Test for leaks and proper dispensing after restoring power and water.

Do-It-Yourself Stories from Customers like You Bad solenoids on bleach and softener dispenser   Carl S. • Dieterich , IL • May 05, 2014

It is a simple fix with removing the old by disconnecting connecters to the solenoids. removing two screws, disconnect the hoses entering and leaving the dispenser. Installing it is simply a reverse of the removal. Total time was certainly less than 30 minutes. Read more

More
$73.49
Compare At:
$88.19
You Save:
$14.70

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Inlet Valve
Genuine Ge part
By: Ge
Part Number: WH13X10014

Fix washer not filling or slow water flow with a new water inlet valve. Controls water entry to your washer. Moderate DIY repair, 30-45 minutes.

More
$137.95
Compare At:
$164.16
You Save:
$26.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: 285874

 

More
$96.95
Compare At:
$116.34
You Save:
$19.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Water Inlet Valve Assembly (Refrigerator)
Genuine Whirlpool part
By: Whirlpool
Part Number: 279888

This water inlet valve assembly controls water flow to the refrigerator's dispenser and ice maker, restoring reliable water delivery and stopping leaks or no-water issues when the original valve fails. What it does:

  • Opens and closes to supply water to the ice maker and door dispenser
  • Allows proper water pressure for filling ice maker trays and dispensing
  • Stops water flow when closed to prevent leaks or overfilling
  • Faulty valves can cause no water from dispenser, slow fill, continuous running, or leaks
What's included:
  • One water inlet valve assembly
Install notes:
  • Disconnect power and shut off the water supply before service
  • Verify fittings and tubing are seated and tightened to avoid leaks
  • Replace only with matching part number and test for leaks after restoring water/power

More
$181.95
Compare At:
$218.34
You Save:
$36.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Bracket Valve
Genuine Ge part
By: Ge
Part Number: WE13X191

 

More
$37.31
Compare At:
$45.95
You Save:
$8.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Dryer Combo Water Inlet Valve
Genuine Ge part
By: Ge
Part Number: WE14X229

Fix a washer dryer combo that won't fill with water or fills slowly. This water inlet valve controls water flow into your unit. Moderate DIY repair.

More
$401.53
Compare At:
$472.52
You Save:
$70.99

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Valve, Shutoff
Genuine Ge part
By: Ge
Part Number: WE1X1236

 

More
$119.34
Compare At:
$122.22
You Save:
$2.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Looking for washer dryer combo valve replacement parts? These small but crucial components ensure your washer dryer combo operates seamlessly. They may go unnoticed, but they are vital in managing water flow, keeping your laundry routine smooth and trouble-free.

A washer dryer combo depends on these valves to effectively handle both washing and drying cycles. Without a functioning valve, you'd risk dealing with unwashed, soaking clothes. These parts regulate hot and cold water input and manage drainage, making them essential for the appliance's optimal performance. Opting for OEM replacement parts guarantees the highest quality and perfect compatibility with your specific model, thus extending the lifespan and efficiency of your appliance.

Finding high-quality washer dryer combo valve parts is easier than you might think. With a wide availability of reliable OEM options, you can ensure your appliance remains in excellent condition.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store